How to Root Huawei Y6 Prime ATU-L31

Huawei Y6 Prime 2018 ATU-L31 stuck at boot, continuously restarts,

Actually, there is some additional protection on your android phone. like AT&T, HUAWEI. So, please try to install kingo manually. but it is not easy. you had better use different root apps.

fastboot devices

fastboot flash recovery_ramdisk recovery.img

Also Available in:-  ATU-L31, ATU-L42

A bit about Huawei Y6 Prime 2018 before rooting

Display: 5.7 inch IPS LCD (720 x 1440 Resolution)

Operating System: Android 8.0 Oreo

Processor: 1.4 Ghz Octa Core

Internal Space: 16 GB

Battery : 3000 mAh Li-Po (Upto 15.1 hours of Talktime)

1) Using Kingroot App

1. Download and Install kingroot app by following the link (http://d.kingoapp.com/default/KingoRoot.apk).
2. Once the app is downloaded on your smartphone tap on the app for installation.
3. Before installation the app required your permission because you are installing a custom app so when a pop-up prompt message will be appeared titled INSTALL BLOCKED just go to SETTINGS and tap on UNKNOWN SOURCE as shown in Figure.
   
4. Now the app will begin to install, once installed open it and tap on button ONE CLICK ROOT.
5. Once the process is finished your phone will be rooted. Be patient during the period of root because some can take upto 30 minutes to root and make sure your phone does not disconnect from internet during rooting.

2) Through SRSRoot Software

The third method to root is quite bothersome and you need usb cable and computer to root.

1. Go to the following website “http://www.srsroot.com/” and install the software on your computer by clicking on download tab given at top of the page.
2. Once installed open software and connect your smartphone via USB Cable.
3. Make sure you enable USB DEBUGGING before continuing.
4. Now click on ROOT DEVICE button on top left corner to start rooting device.

How to Unroot Huawei Y6 Prime 2018

Just like rooting you should unroot your phone whenever you visit customer service office to repair your smartphone or installing operating system updates on your smartphone.

Using Supersu App

1. Go To Playstore and Download Supersu App.
2. Now go to settings page, scroll down and tap on FULL UNROOT.
   

Using Es File Explorer

1. Go to play store and download the app ES File Explorer on your Internal Storage
2. Once installed open the app and click on MENU mentioned on top left side of the page.
3. Now tap on Tools and then turn on ROOT EXPLORER.
4. After turn on Root Explorer go back to the app dashboard and go back to destination “/”.
5. Now go to folder SYSTEM -> BIN and delete file SU.
6. Then go back to another folder SYSTEM -> XBIN and delete file SU.
7. Now go back to folder SYSTEM -> APP and then remove SUPERUSER.APK file.
8. Once the files are deleted reboot your phone, congrats your phone is unroot.

В этом руководстве мы поможем вам прошить магиск к корень Huawei Y6 2018. Внимательно прочтите наше пошаговое руководство!

Кто не хочет максимально использовать возможности своего Android-устройства!!! Получение суперпользователь доступ через root и возможность контролировать различные аспекты, такие как синхронизация, доступ к кешу и т. д. это лишь некоторые из различных возможностей, которые мы можем изучить. Когда мы упоминаем о корневом доступе, это означает, что нам нужно выполнить определенную модификацию, которая приведет к рутированию нашего телефона, и у нас будет доступ к корневому каталогу нашего устройства. В этом посте мы покажем вам, как получить root права на Huawei Y6 2018.

Huawei Y6 2018 оснащен 5,7-дюймовым дисплеем с разрешением экрана 720 x 1440 пикселей. Смартфон оснащен процессором Qualcomm MSM8917 Snapdragon 425 в сочетании с 2 ГБ оперативной памяти. В телефоне 16 ГБ встроенной памяти, которую также можно расширить до 256 ГБ с помощью карты microSD. Камера на Huawei Y6 2018 оснащена задней камерой на 13 МП со светодиодной вспышкой и фронтальной камерой для съемки селфи со светодиодной вспышкой на 5 МП. В телефоне установлена ​​ОС Android 8.0 Oreo и несъемный литий-ионный аккумулятор емкостью 3000 мАч.

Мы будем использовать Magisk, исправив стандартный загрузочный образ и прошив его в загрузочный раздел. Однако это может вас запутать, поэтому спасибо разработчику XDA ВОЗ делал прошивку и прошивку стоковой загрузки. Он тот, кто приносит это всем коренным фанатикам. Все, что вам нужно сделать, это загрузить файл с исправленным изображением и прошить его. Также благодаря , человек, стоящий за разработкой Magisk.

Вам нужно иметь на своем телефоне, прежде чем вы сможете получить root права на Huawei Y6 2018. Мы подробно описали этот метод ниже.

В основном непосвященные люди сравнивают рутирование со взломом, что неправильно. Цель в обоих контекстах совершенно разная. Хакерство больше похоже на незаконное проникновение в чужую систему, тогда как рутирование в основном выполняется владельцем устройства Android, чтобы получить преимущества устройства для суперпользователя.

• Шаги по рутированию Huawei Y6 2018 с помощью Magisk
  • Предварительные требования
  • Инструкции по установке
  • Удалите Magisk на Huawei Y6 2018:

If you own a Huawei Y6 ATU-L11/ L21/ L22, and also want to root the device, then you are on the right page.

If you are an Android Enthusiast, and want to Root and Install TWRP recovery on your beloved, then you have landed on the right page. In the due course of the article, we will guiding you through the process to root Huawei Y6 ATU-L11/ L21/ L22 .

If you want to unleash the full potential of the hardware of your Huawei Y6 ATU-L11/ L21/ L22 , then rooting and flashing custom recovery like TWRP is the main concern. The Stock ROMs have often limited and unsupported features in the sense of Customization. When you have a rooted device and also flashed TWRP recovery, then you are free to install any Custom ROMs, Mods, Kernel, and Xposed etc., as well as many apps which requires root access to work properly. You can easily root the device with One Click Android Root Tool, with either via PC or through the APK, which is a quick process.

Brief Details and Advantage of TWRP Recovery

TWRP (Team Win Recovery Project) is an open source, community development project. By flashing the TWRP, your device will be enabled to install any custom firmware, rooting your smartphone, mod zip files for customizations, Xposed Modules for customized features, one click root and unroot processes. Apart from that, it allows you to take Full Nandroid Backup and restore it later, one click image file flashing, remove bloatware, overclock and underclock. Using TWRP, one can easily clean Wipe, Cache and Data after flashing any image file to reflect the changes and rectify minor errors due to cache.

For installing the TWRP, your Huawei Y6 ATU-L11/ L21/ L22 phone must have the Unlocked bootloader. That means you have to firstly unlock the bootloader to root your device as well doing any customization.

Prerequisite

Ensure to check your model number, which must be:

• Huawei Y6 ATU-L11/ L21/ L22

You must have to ensure that prior to rooting your phone , you have read thoroughly the disclaimer and you agree to proceed further on your risk.

• Phone Should be Charged

Your phone must be 70% charged at least, else, it may lead to complications sometimes while experimenting. Why to take risk, try to charge it fully.

• Back Up

If you are either going to root your phone or install a Custom ROM, it is a good habit to make a back up of your phone. Make a back up of all your media like images, videos and all on your PC and your contacts on Cloud.

• Enable USB Debugging

(Applicable only for PC method, Skip if you will use APK method)

You must enable USB debugging option by going in to Settings, Applications and Developer options.

Downloads For Rooting Huawei Y6 ATU-L11/ L21/ L22

Download Universal ADB Drivers here (If your PC have already drivers installed then skip this)

Download platform-tools/ SDK Tools package from Android SDK on PC from here. (Android command line tools> SDK Tools package)

Download TWRP Recovery for Huawei Y6 ATU-L11/ L21/ L22 from here:
TWRP Recovery 3.2.3.0  (Latest)

Download SuperSU by Chainfire from here.

Download Magisk Manager from here.

Make sure that you have downloaded the required files (link in pre-requisite section of this article). Then, proceed to the steps.

Steps to Unlock Bootloader of Huawei Y6 ATU-L11/ L21/ L22

Note: If you have already unlocked bootloader, then skip these steps.

Step 1: First, you need to Connect your Huawei Y6 ATU-L11/ L21/ L22 Device to the computer, in Fastboot Mode. You can reboot your device to fastboot using the command in adb terminal:

adb reboot bootloader

Step 2: Now, open the Adb Terminal in PC, and then just enter this command:

fastboot oem unlock-go

Step 3: Then, issue this command:

fastboot oem unlock-go

At this stage, your device will be reboot automatically. Now, you can Root Huawei Y6 ATU-L11/ L21/ L22, as bootloader of your device is already unlocked.

Steps to Flash/ Install TWRP on Huawei Y6 ATU-L11/ L21/ L22

Step 1: Assuming you have already downloaded the platform-tools from Android SDK (SDK Manager) platform-tools on your PC. The platform-tools contains the required adb and fastboot binaries.

Step 2: Make sure that the drivers are installed on your computer. Then, skip to the next step.

Step 3: Now, enable the developer settings on your Huawei Y6 ATU-L11/ L21/ L22 Device. To achieve the same, just navigate to the Settings -> About and then find the ‘Build Number ‘, and then tap on ‘Build Number’ for 7 times, this will enable the developer settings on your device.

Step 4: If you have USB Debugging already, then skip this step. If you have not, then open the Developer Options and then enable USB debugging option.

Step 5: Now, open the command prompt in computer/ ADB Terminal, and simply type the command:

adb reboot bootloader

Step 6: Your device should have not entered into fastboot mode. Now copy the TWRP.img file downloaded in prerequisite section, to the same folder where adb and fastboot binaries are located. Rename the file to ‘twrp.img’ and then enter this command:

fastboot flash recovery twrp.img

and then run this command, type:

fastboot reboot

Step 7 : Some devices might not replace the custom recovery automatically during the first boot. You can search Google for key combinations to enter your device into recovery mode. After running the ‘fastboot reboot’ command, press and hold the proper key combination to enter device into TWRP Mode. Once the device boots to TWRP mode, the TWRP will automatically patch the stock ROM, to prevent the chances of replacing TWRP with Stock Recovery.

Procedure to Root Huawei Y6 ATU-L11/ L21/ L22/ Install Magisk or SuperSU

Make sure that you have downloaded SuperSU or Magisk Manager (link in pre-requisite section of this article). Then, proceed to the steps.

Caution: You can use either Magisk Manager or Super SU, but only one, so choose wisely. Go for Magisk Manager if you are not sure.

Step 1: Transfer the downloaded SuperSU or Magisk Manager file to the internal storage / SD card of your Huawei Y6 ATU-L11/ L21/ L22 smartphone.

Step 2: Now, just boot into the recovery. From the TWRP interface, you can optionally backup the Stock ROM. Though, I would recommend to backup the Stock ROM. Because if in case process gets failed, you can flash the Stock ROM.

Step 3: Tap on Install ‘, and then navigate to the file ‘SuperSU.zip’ or ‘magisk.zip’ and swipe to confirm flash (located at the bottom of the screen). The flashing process of Magisk/ SuperSU has been started and will take few seconds to complete.

Congratulations, now you have rooted Huawei Y6 ATU-L11/ L21/ L22 and also flashed the TWRP. Now, you can install Xposed Framework, and customize your smartphone as per your preference. If you wish to verify, you may download and check the Root Status through Root Checker app.

If you own a Huawei Y6 Prime (2018) ATU-L31/ATU-L42, and also want to root the device, then you are on the right page.

If you are an Android Enthusiast, and want to Root and Install TWRP recovery on your beloved, then you have landed on the right page. In the due course of the article, we will guiding you through the process to root Huawei Y6 Prime (2018) ATU-L31/ATU-L42 .

If you want to unleash the full potential of the hardware of your Huawei Y6 Prime (2018) ATU-L31/ATU-L42 , then rooting and flashing custom recovery like TWRP is the main concern. The Stock ROMs have often limited and unsupported features in the sense of Customization. When you have a rooted device and also flashed TWRP recovery, then you are free to install any Custom ROMs, Mods, Kernel, and Xposed etc., as well as many apps which requires root access to work properly. You can easily root the device with One Click Android Root Tool, with either via PC or through the APK, which is a quick process.

Brief Details and Advantage of TWRP Recovery

TWRP (Team Win Recovery Project) is an open source, community development project. By flashing the TWRP, your device will be enabled to install any custom firmware, rooting your smartphone, mod zip files for customizations, Xposed Modules for customized features, one click root and unroot processes. Apart from that, it allows you to take Full Nandroid Backup and restore it later, one click image file flashing, remove bloatware, overclock and underclock. Using TWRP, one can easily clean Wipe, Cache and Data after flashing any image file to reflect the changes and rectify minor errors due to cache.

For installing the TWRP, your Huawei Y6 Prime (2018) ATU-L31/ATU-L42 phone must have the Unlocked bootloader. That means you have to firstly unlock the bootloader to root your device as well doing any customization.

Prerequisite

Ensure to check your model number, which must be:

• Huawei Y6 Prime (2018) ATU-L31/ATU-L42

You must have to ensure that prior to rooting your phone , you have read thoroughly the disclaimer and you agree to proceed further on your risk.

• Phone Should be Charged

Your phone must be 70% charged at least, else, it may lead to complications sometimes while experimenting. Why to take risk, try to charge it fully.

• Back Up

If you are either going to root your phone or install a Custom ROM, it is a good habit to make a back up of your phone. Make a back up of all your media like images, videos and all on your PC and your contacts on Cloud.

• Enable USB Debugging

(Applicable only for PC method, Skip if you will use APK method)

You must enable USB debugging option by going in to Settings, Applications and Developer options.

Downloads For Rooting Huawei Y6 Prime (2018) ATU-L31/ATU-L42

Download Universal ADB Drivers here (If your PC have already drivers installed then skip this)

Download platform-tools/ SDK Tools package from Android SDK on PC from here. (Android command line tools> SDK Tools package)

Download TWRP Recovery for Huawei Y6 Prime (2018) ATU-L31/ATU-L42 from here:
TWRP Recovery 3.2.3.0  (Latest)

Download SuperSU by Chainfire from here.

Download Magisk Manager from here.

Make sure that you have downloaded the required files (link in pre-requisite section of this article). Then, proceed to the steps.

Steps to Unlock Bootloader of Huawei Y6 Prime (2018) ATU-L31/ATU-L42

Note: If you have already unlocked bootloader, then skip these steps.

Step 1: First, you need to Connect your Huawei Y6 Prime (2018) ATU-L31/ATU-L42 Device to the computer, in Fastboot Mode. You can reboot your device to fastboot using the command in adb terminal:

adb reboot bootloader

Step 2: Now, open the Adb Terminal in PC, and then just enter this command:

fastboot oem unlock-go

Step 3: Then, issue this command:

fastboot oem unlock-go

At this stage, your device will be reboot automatically. Now, you can Root Huawei Y6 Prime (2018) ATU-L31/ATU-L42, as bootloader of your device is already unlocked.

Steps to Flash/ Install TWRP on Huawei Y6 Prime (2018) ATU-L31/ATU-L42

Step 1: Assuming you have already downloaded the platform-tools from Android SDK (SDK Manager) platform-tools on your PC. The platform-tools contains the required adb and fastboot binaries.

Step 2: Make sure that the drivers are installed on your computer. Then, skip to the next step.

Step 3: Now, enable the developer settings on your Huawei Y6 Prime (2018) ATU-L31/ATU-L42 Device. To achieve the same, just navigate to the Settings -> About and then find the ‘Build Number ‘, and then tap on ‘Build Number’ for 7 times, this will enable the developer settings on your device.

Step 4: If you have USB Debugging already, then skip this step. If you have not, then open the Developer Options and then enable USB debugging option.

Step 5: Now, open the command prompt in computer/ ADB Terminal, and simply type the command:

adb reboot bootloader

Step 6: Your device should have not entered into fastboot mode. Now copy the TWRP.img file downloaded in prerequisite section, to the same folder where adb and fastboot binaries are located. Rename the file to ‘twrp.img’ and then enter this command:

fastboot flash recovery twrp.img

and then run this command, type:

fastboot reboot

Step 7 : Some devices might not replace the custom recovery automatically during the first boot. You can search Google for key combinations to enter your device into recovery mode. After running the ‘fastboot reboot’ command, press and hold the proper key combination to enter device into TWRP Mode. Once the device boots to TWRP mode, the TWRP will automatically patch the stock ROM, to prevent the chances of replacing TWRP with Stock Recovery.

Procedure to Root Huawei Y6 Prime (2018) ATU-L31/ATU-L42/ Install Magisk or SuperSU

Make sure that you have downloaded SuperSU or Magisk Manager (link in pre-requisite section of this article). Then, proceed to the steps.

Caution: You can use either Magisk Manager or Super SU, but only one, so choose wisely. Go for Magisk Manager if you are not sure.

Step 1: Transfer the downloaded SuperSU or Magisk Manager file to the internal storage / SD card of your Huawei Y6 Prime (2018) ATU-L31/ATU-L42 smartphone.

Step 2: Now, just boot into the recovery. From the TWRP interface, you can optionally backup the Stock ROM. Though, I would recommend to backup the Stock ROM. Because if in case process gets failed, you can flash the Stock ROM.

Step 3: Tap on Install ‘, and then navigate to the file ‘SuperSU.zip’ or ‘magisk.zip’ and swipe to confirm flash (located at the bottom of the screen). The flashing process of Magisk/ SuperSU has been started and will take few seconds to complete.

Congratulations, now you have rooted Huawei Y6 Prime (2018) ATU-L31/ATU-L42 and also flashed the TWRP. Now, you can install Xposed Framework, and customize your smartphone as per your preference. If you wish to verify, you may download and check the Root Status through Root Checker app.

I want you to know about some things which are really important.

• It can affect the warranty since the warranty gets void for rooted devices.
• And sometimes, Rooting might also result in affecting battery health. So, if you are too conscious about battery health, then I would not recommend this to you.

There are different Huawei Y6 Prime 2018 ATU-L31  available. so try  with the below apps and Softwares one by one 

I’m going to provide a detailed solution for each of these different category devices.

• Should have at least 50% of battery charge level.
• Proper internet connection.
• Original USB cable. (Option)
• The root process is a very risky process. So if some bad thing happens to your android device we will not be responsible for it.

Install KingoRoot on your Device Properly

• Allow it to install applications from unknown sources.

• after Install, Launch the KingoRoot app.
• As I said, KingoRoot is very easy to maintain. To start the process click on the “One Click Root”.

• Patiently wait for a few seconds until the outcome appear.

• Finally, you have done it

Fix “Unfortunately, kingroot has Stopped” Error in Huawei Y6 Prime 2018 ATU-L31

This is not related to the Rooting process. This is an error in your phone’s cache. So you have to delete those caches. then this problem will be settle. 

Why Kingo and other apps detected by antivirus as malicious?

exploiting system vulnerabilities/security loopholes, which is and will  be “dangerous” to your antivirus guard.. So you had better disable it for few minutes.

After root, some of the Features Not working properly

I rooted my phone and Now, WiFi, Mobile data, Bluetooth, sensors, keyboard, speakers, MIC, Host-spot and GPS does not work properly.

It seems, Something went Wrong. When we are rooting these kinds of things may happen. All you have to do is Install Stock Rom and then again try to root your device.

I Can Not Root My Huawei Y6 Prime 2018 ATU-L31

Kingroot is always updating applications. some times your device is not supported by the app. However, If you are still unable to root your phone, You have two options.  one is, try or use different Root app – Best Apps that support any phone

Fix “Unfortunately, OneClickroot has Stopped” Error in Huawei Y6 Prime 2018 ATU-L31

This is not related to the Rooting process. This is an error in your phone’s cache. So you have to delete those caches. then this problem will be settle. 

1. Reboot/Restart your device. works?
2. Delete/erase cache and data in Oneclickroot

Your Phone is so solid to root: Network error. failed to get components.

Rooting Apps want to access the internet. This error happens when the app can’t connect to the internet.

–

• please Recheck your Data connection is ON or not.. it is ON and No internet connectivity?
• Then restart the phone.. If not works, Please check your balance.

–

• If you use WIFI, then Please Recheck the WIFI button in your device.. (untap and Tap it).
  If not works, then reset your WIFI Router. If not works,
• Then switch off and On your WIFI Router. all are not works?
• Then go to Wifi Setting >>choose your WIFI connection>>” Forget Network” ().and search WIFI connection and connect it again

error code: 0x19E775? / need root/Shell-root could not be accessed

You had better use a different Root app. We listed all possible

Root Huawei Y6 Prime 2018 ATU-L31 with dr. fone

• Click on the “Root” button from the options list.

• Connect your android device via USB cable.

• Click on the button to root your device.

• Wait for a few seconds patiently because it takes some time to detect your Huawei Y6 Prime 2018 ATU-L31.

• Now click on the button to start the rooting process.

• Tap on the “Confirm” when it prompted.

• You have successfully rooted your device.

Root Huawei Y6 Prime 2018 ATU-L31 with Kingroot

1. KingRoot from the above link and copy & paste that into your phone’s Micro SD card
2. Now, Go to the Miro SD card on phone and tap the “king root APK icon” after tapping, check “unknown sources” on the next window
3. After that Tap the “install button”. Wait until installation completed.

1. After installing the KingRoot app, Open it by tapping.
2. Now Tap the “try to Root” option to start the rooting process

• After tapping “Try to Root” It will start rooting and after few minutes it will show green Right saying “Root status.
• After performing Root, You are free to use your phone and flash Custom Roms/ Custom recovery.

Now your android device is rooted

Check If Huawei Y6 Prime 2018 ATU-L31 Is Rooted Properly

you can make sure that your phone rooted or not using these simple tips.  If there is an App Called “SuperSu” then your phone is Rooted. If you have doubt again? then use . it will tell you whether or not the phone has root access.

I Can not OTA update after rooting?

After you rooted your phone, then you can’t get updates automatically. If you want? then go to

Root Huawei Y6 Prime 2018 ATU-L31 with Kingoroot

• If you got a warning message from Chrome about KingoRoot.apk then click the “OK” button and go forward.

Su binary needs to be updated Huawei Y6 Prime 2018 ATU-L31

Root failed in Huawei Y6 Prime 2018 ATU-L31 related problems

• Get stuck kingoroot. No Strategy Found/need root/ Connection Unstable/please check your phone vulnerabilities/Your device seems not vulnerable to exploit included in framaroot/

Шаги по рутированию Huawei Y6 2018 с помощью Magisk

• После рутирования это может привести к аннулированию гарантии на ваш телефон.
• Укоренение заблокирует обновления OTA

Вот ссылка на то же самое.

• Убедитесь, что в вашем телефоне достаточно заряда аккумулятора, чтобы не прерывать установку патча.
• Перед выполнением любых изменений сделайте резервную копию данных вашего устройства.
• Этот файл изображения предназначен только для Huawei Y6 2018. Не используйте его на других устройствах Huawei или Android.
• Установить ADB и Fastboot файлы. (/)
• ПК / ноутбук и кабель micro USB.
• Установить USB-драйверы Huawei Y6 2018.

Инструкции по установке

Предполагая, что вы выполнили приведенную выше инструкцию и разблокировали загрузчик, мы продолжим мигать исправленный загрузочный образ.

• Во-первых, давайте начнем с перевода нашего телефона в режим быстрой загрузки.
• Удерживайте и долгое нажатие Кнопка питания + клавиши регулировки громкости для иногда. Не отпускайте кнопки, пока не увидите экран быстрой загрузки.
• Теперь подключите ваше устройство к ПК / ноутбуку через USB-кабель.
• Если вы еще не загрузили файл с исправленным изображением и
• Переместите этот файл в папку ADB на ПК.
• Пока вы находитесь в папке ADB, нажмите правую кнопку мыши + клавишу Shift в пустом месте. Вы увидите всплывающее диалоговое окно, показанное ниже.
• Щелкните здесь «Открыть окно Powershell». Обычно командная строка открывается при нажатии.
• Теперь введите следующую команду и нажмите ввод.

  устройства fastboot

• Эта команда вернет идентификатор устройства, чтобы подтвердить, что ваше устройство подключено правильно.
• Это важный шаг. Введите точную команду без кавычек.

  fastboot flash ramdisk ATOMU-Magisk__.img

• Это исправит ramdisk Magisk на ваше устройство, и ваш телефон будет рутирован.
• Перепрошивка может занять некоторое время. После перепрошивки нужно перезагрузить устройство. Для этого подайте команду,

  перезагрузка fastboot

Ну это все. Теперь, когда вы знаете, как получить root права на Huawei Y6 2018, вы можете попробовать это. Если у вас есть какие-либо вопросы по этому поводу, дайте нам знать.

Удалите Magisk на Huawei Y6 2018:

• Загрузите стандартный ramdisk из раздела загрузок.
• Перезагрузитесь в fastboot с помощью ADB или выключите устройство, затем удерживайте кнопки питания и уменьшения громкости, пока не появится Fastboot.

  загрузчик перезагрузки adb

• После того, как вы вошли в fastboot, введите следующую команду, чтобы установить стандартный ramdisk:

  fastboot flash ramdisk ramdisk.img

• Это оно! Теперь вы можете перезагрузить устройство, набрав.

  перезагрузка fastboot

Я надеюсь, что это руководство помогло рутировать ваш Huawei Y6 2018 с помощью Magisk.

Я автор технического контента и блогер на полную ставку. Поскольку я люблю Android и устройства Google, я начал свою карьеру с написания статей для ОС Android и их функций. Это привело меня к запуску «GetDroidTips». Я получил степень магистра делового администрирования в Университете Мангалор, штат Карнатака.

Fix “Unfortunately, kingoroot has Stopped” Error in Huawei Y6 Prime 2018 ATU-L31

This is not related to the Rooting process. This is an error in your phone’s cache. So you have to delete those caches. then this problem will be settle. 

1. Reboot/Restart your device. works?
2. Delete/erase cache and data in kingoroot

Root Huawei Y6 Prime 2018 ATU-L31 with Oneclickroot

• Launch One Click Root.
• Now connect your device to your computer by using the USB cable.

• Click on the “Root” button to start the process.
• Wait for a few minutes. Finally, you have done it